Table Saw Safety Rules – Woodworking Tips
Shaping and cutting timber with grain pattern is the best way to cut a particular board; this is because the grain pattern tells a lot about the wood. It also helps you to work efficiently, produce smooth, precise and excellent results on wood.
To do this, you would need a saw, and the best type of saw for this sort of woodwork is the Table saw. Using a handsaw to do this manually would be exhausting and might not produce the desired result necessary.
The table saw consists of a circular saw blade which is firmly fixed on the arbor, with a guide on the side to keep its place. The guide is responsible for precision while cutting wood.
The drawbacks that come with this device can be hazardous if it isn’t used with caution and skill, but if used correctly would require minimal efforts for a befitting outcome. There a few things to take into note while using the table saw to ensure safety.
Work At Your Pace
To have anything done accurately and efficiently, one must learn to work a little slowly and carefully (well, except if there be a need for any rush). This also applies here.
The table saw allows the user to produce smooth and precise results and would also allow the user to work with ease. The desired results would only be gotten if the table saw is used, and for you to get your work done well, then you must take your time.
Ensure to set time aside or allow enough time necessary for your work to be done effectively. Rushing over your work would likely produce a poor result and also increases the risk of hazards.
Protect Yourself While Working
Your safety is a priority and one of the ways you can ensure it is by putting on safety or protective equipment. Some of which are goggles, ear defenders and clothing that wouldn’t cause any hitch to the saw.
These protective wears are otherwise called Personal Protective Equipment (PPE). The use of gloves has caused a bit of controversy as to whether they are safe or not. Some people maintain that it could be jagged in the saw while a few others maintain that it must be worn. There are advantages and disadvantages to the two cases.
Goggles are essential, not just for the safety of your eyes but also for your hands. Asides from its primary function, which is to protect your eyes from sawdust, clear perception through the goggles are vital to prevent your fingers from getting caught while sawing.
Therefore, it is Important to make sure the surfaces of the goggles are not scratched. If at any point, you get sawdust into your eyes, make sure to stop and take care of your eyes first.
Make Sure Everything is in Place
The blade should be tightly or firmly held in place by screwing up the nut if there is any need. Make sure to check for the flank motion of the blade on its axis, before turning on the power.
Cleanliness of workspace and tool is also vital. It is necessary to ensure that the woodwork tool is free of sawdust to ensure smooth and unobstructed work.
To ensure that the cutting follows a particular grain pattern, there are a few things to take into a note. Firstly, the type of saw in use should be noted; this would guide you to the location of the rip fence and the miter gauge. Secondly, these two should be checked to ensure that they are equidistant to the blade and also fixed. Thirdly, check the clamps to ensure they are also tightened up.
The dust shroud, if available should be directed away from the user and can be connected to a simple dust bag or a vacuum dust collection bag or vacuum cleaner.
Lastly, it is essential to sure that the blade safety cover is in place and movable. This is to prevent injuries.
Confirm That Everything is in Place
You are good to go, once you’ve checked everything and confirmed that it’s in good shape. The wood should cut with minimal force applied, if it isn’t then, it should be re-checked. If there is a need for the push stick, it should be used.
As a woodworker who makes use of a table saw from time to time, following safety precautions is very important. Safety precautions not only ensure that you are safe, but they also make sure whatever piece you are working on and working with doesn’t get damaged.